Roctech CNC Router 4x8 and Servos

Description

I have one of these with the rotary 4th axis.
It is 27K, but it is awesome.  Without rotary, 23K.
These  work perfect for 3D work. Absolutely fantastic machine for sign shops, etc..
Shipping from Terre Haute to you is actual charges, no extras.
Don't be fooled by people selling low quality spindles and stepper motors. We only sell High Quality HSD spindles and Yaskawa servos.  Entire machine is single phase including vacuum pump if you want one.
I personally test every machine before I sell them.  Receive free training at our showroom.
I now have an operation video ready for you. It shows me running the machine and is very easy to follow.
There are many CNC routers on E-bay, but none are like this one.
Most have undersized stepper motors that lose torque at high speed. Lost torque means lost position which generates scrap and lost revenue.
Don't buy a cheap made stepper machine, get a commercially made servo RocTech CNC.
This machine has four 850 Watt servo motors with high resolution encoders. It has 2 motors that drive the y axis gantry, and one motor each for the x and Z axes. What does this mean? Over 2 horsepower of drive power for the y axis drive allows this machine’s gantry to accelerate and decelerate quickly while maintaining full positional control. Stepper motor machines lose position at high accelerations. Lost position=lost revenue. Servo machines with position encoders don’t loose position. It’s the best of both worlds, fast and accurate. Machine has 12 inches of Z clearance. Machine is capable to work at 1000 IPM, but that is far too fast for most chip loads.  Cutting at 600 IPM or less is normal.
One of the big advantages to buying from us is that you will be getting a non-proprietary machine. If you purchase a domestic name brand, you are stuck paying outlandish rates should you have a problem.
There are no compromises in this machine. In the CNC world, heavy welded frames are rigid and accurate. Sloppy bolt together frames flex and generate scrap.
Many machines have underpowered spindles and cheap drives or worse, repurposed handheld routers. This machine has a beautiful 4 Horsepower HSD spindle and a high quality Delta Inverter. For most work, there is no better combination for the money. Cheap inverters burn up spindles and cheap spindles don’t last.
This machine has a well thought out vacuum system to make your job hold down quick and easy, saving time and labor cost. One square foot of hold down area can generate almost a ton of hold down force.
This machine runs on 220 Volts single phase and weighs over 4000 lbs. Dollar for dollar, pound for pound, you will not find a better machine.
The Hiwin 25mm linear rails are exceptionally rigid. Many other machines use V rails because they are cheap. The problem with V rails is that the rails wear and introduce error into the cutting. Hiwinn hardened rails are made for day in day out industrial use and come with an easy to use lubrication system.
This machine uses an industrial controller, a Syntec 60W-E. This controller is usually found on much more expensive ATC machines. But we use it now for this machine because this machine is so well built, many cabinet making companies are now using this machine.
Just plug in a thumb drive with your tool paths from Fusion360, Aspire, Vcarve Pro, Mastercam or any other CAM software that will generate G-code.
Also included is a handheld controller. This makes setup a snap because you can control the machine while you are securing your work to the table. This is a huge time saver when combined with automatic tool zeroing.
All the wiring is neatly executed. The cabinet has doors on both sides for easy access and each door locks with a key. The cabinet also includes filtered fans to keep all the electronics cool and reduce dust entering the cabinet.
We do now have an American made 220v single phase vacuum pump option. We also have Becker pumps.
We do not want to use Paypal. We accept
cashier's
check, money order, or wire transfer. We will gladly provide our bank's information for you to call to verify our credentials.
We can ship this anywhere in the continental USA for actual charges. We only use professional shippers.
Or pick it up here while you get your free training.  Free support from me for life.
One year limited warranty from RocTech.
1325S Training Video - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Vacuum System - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Circle Cutting on Roctech CNC Machines - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]