-40%
Probe Touch Plate, Z-Axis Tool Zero
Probe Touch Plate, Z-Axis Tool Zero
Probe Touch Plate, Z-Axis Tool Zero

Probe Touch Plate, Z-Axis Tool Zero

$ 5.8

Availability: 105 in stock
  • Condition: New
  • Restocking Fee: No
  • Brand: Undisclosed
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer
  • MPN: Does not apply

    Description

    Auto tool Zero Probe Touch Plate for Mach3 CNC Router Mill Engraving Machine Tools
    Description:
    Diameter:(Approx.) 35mm/1.38"
    Height:(Approx.) 20mm/0.79"
    Effective surface of the knife: 25mm diameter/0.98"
    Cable length  4 feet, 1.2 meters
    Bottom Insulation Knife Block
    Includes alligator clips
    Connection and configuration:
    If connecting to a CBX controller by CNC Basis you should select Probe Touch Plate with 3.5 Jack connector option and plug it on the back of the controller "Probe".
    If using Mach3 Screen by CNC Basis then the only thing you need to do is set "New Tool Height", please notice you could just type dimensions on "Height" DRO and hit enter but it will not recall Tool Height next time you open Mach3, this option is useful for any specific job that requires one time Tool Height.
    No need to configure macros or anything else.
    If using any other controller or breakout board then need to connect usually to GND and Pin 15 of Port 1 (or any of limit switch inputs) and configure it in Mach3 also need to configure Button Script in Operator of Mach3.
    Please refer to control board operation manual or instructions as may be using 5V, 12V or 24V instead of GND as well as a different Pin or Port.
    Listing and template services provided by inkFrog