P&S Ivory Occupancy Sensor Switch LED/CFL/FLR/INC 1050ft² 800W 120/277V WSP250-I

Description

Fruit Ridge Tools, LLC
Our eBay Store
Contact Us
Add to Favorite Sellers
P&S Ivory Occupancy Sensor Switch LED/CFL/FLR/INC 1050ft² 800W 120/277V WSP250-I
Product Details
Quantity in Lot:
1
Brand:
Pass & Seymour
Part Number:
WSP250-I
Color:
Ivory
Type:
Passive Infrared Sensor
Switch Configuration:
Single Pole
Additional Features (if applicable):
1050 Square Feet
Voltage:
120/277VAC
Grade:
Commercial Specification Grade
Terminal Type(s):
Wire Leads
Ground:
Grounding Wire
Pass & Seymour WSP250-I ivory PIR occupancy sensor switch. Commercial grade, single pole, back and side wired, rated 800W @ 120V, 1200W @ 277V, 1/6HP, 60Hz. Each is individually packaged; packaging may differ from photos. Features include:
Compatible with all electronic ballasts and PI lamp ballasts
No minimum load requirement
Time delay adjustment from 30 seconds to 30 minutes
180 degree coverage of up to 1050 sq. ft
Compact, decorator design replaces existing wall switch
Dual 1 20/277VAC operation
Built in light level sensor assures that lights are only turned on when ambient light levels require it - adjustable from 2 to 200 footcandles
30% to 60% energy savings
Adjustable sensitivity from 20% to 100%
Patented voltage drop protection
Patent pending zero crossing circuitry
Positive detection LED indicator
ASIC circuitry provides high immunity to RFI and EMI
Application suggestions:
Small, individual offices - sensors should have a direct, clear, front view of stationary occupants. Be sure sensors will not be blocked by doors, filing cabinets, etc.
Small conference rooms under 300 sq. ft - to ensure detection at the far end of a room, it is recommended that the wall switch sensor be within 20 feet of the farthest wall
Break rooms up to 300 sq. ft. - sensor should have a clear view of the room from the sensor location. For a room with an open wall that leads to other areas, masking material is included so the coverage zone may be more tightly defined.
Copy and work rooms smaller than 300 sq. ft - this sensor should work well; however, if large copiers block the sensor's view, use a ceiling mount PIR sensor
Utility rooms smaller than 300 square feet - this sensor will work well; however, if occupants spend lengthy periods of time behind cabinets or other structures, an ultrasonic sensor is a better choice
This is New Old Stock and is returnable for any reason. (SKU # PASWSP250-I-EA; Weight: 0.3500 lbs.)