NEW Compact Electric Booster Water Heater

Description

This unit is new, never used. Listing for unit only, as shown in images. No retail packaging or 6" legs.
The Hatco® Mini-Compact Electric Specialty Water Heater provides 180°F (82°C) water for hot water sanitizing and can be installed almost anywhere.
STANDARD FEATURES
Provides water at 180°F for hot water sanitizing or point-to-use water dispensing
3/4" NPT fitting for inlet and outlet
208V, 3 Phase Low Water cutoff to prevent element burnout
3.2 gallons (12 liters) Capacity Mini-Compact Water Heaters feature a stainless steel tank and a fast recovery Stainless steel front with powder coated silver-gray hammer tone body and black base Fiberglass insulation to minimize heat loss
Low-water cut-off (LWCO),temperature/pressure relief valve, pressure reducing valve and two temperature/pressure gauge
WATER TEMPERATURE RECOVERY
40F°(22°C) Rise= 99ghp (375 Iph)
70°F (39°C) Rise= 57 gph (216 lph)
WATER QUALITY REQUIREMENTS
Incoming water in excess of 3.0 grains of hardness per gallon (GPG) (.75 grains of hardness per liter) must be treated and softened before being supplied to booster heater(s). Water containing over 3.0 GPG (.75 GPL) will decrease the efficiency and reduce the operating life of the unit.
SPECIFICATIONS
Width: 11 3/4"
Depth: 12 7/8"
Height (with legs): 18 1/2"
Amps27.5 Amps Hertz60 Hertz Phase3 Phase
Voltage208 Volts Wattage10 Kilowatts
Flow Rate57 - 99 GPH
Plug Type: Hardwire
Made in America
NSF Listed