NAPCO PIR1680 50x50 Smart Microprocessor PIR Sensor 20lb Pet Immunity+ Room Temp

Description

NAPCO
PIR1680S
Hardwired Passive Infrared Sensor w 20lb Pet/Animal Immunity - New, In Box
Advanced PIR1680 Series Passive Infrared Motion Detectors exemplify NAPCO sensor technologies innovation, increasing dependability without compromising intruder catch sensitivity.
For applications where animal/pet immunity is key, the PIR1680 supports a 50 (15.2m) range and offers a 20lb. (9kg) animal/rodent immunity. Outstanding false alarm rejection is made possible with their advanced microprocessor that has been embedded with a library of valid and false alarm signal signatures enabling the PIR to differentiate intruders from animals and other traditional false alarm sources.
In addition to proven intruder-detection circuitry, these units also feature a built-in temperature sensor at no additional charge so you can provide traditional security, as well as climate security from heat and/or freeze damages, when HVAC systems fail, before pipes burst or decor, pets or perishables are ravaged by heat extremes, otherwise left unchecked.
Technical Specifications:
Microprocessor: 2K ROM with A-D Converter
Operating temperature: -10 to +50 degrees C (14o to 122o F)
Freeze damage alert: 40oF (4oC)
Heat damage alert: 90oF (32oC)
Mounting: Wall or corner, 12' (3.6m) max.; For pet/animal applications 7' (2.1m) is recommended.
Output relay: Form A; normally closed
Relay time: Approx. 3 seconds
Alarm Relay: 100mA, 24Vdc with internal 10 ohm current limiting resistor
Multi-mode Trouble Output (Open collector)
Self-Test Interval: 11 - 16 hrs.
Power supply requirements: Filtered 10.6 to 16VDC nominal with battery backup from the control panel.
Current drain: 28mA (idle/alarm) at 12VDC (nominal)
Dimensions: 3.3"H x 2.5"W x 1.9"D (8.4 x 6.4 x 4.8 cm) (HxWxD)
Shipping weight: 5 oz (142 gm)
Please check my 100% positive feedback for your purchase confidence.
Immediate shipping upon payment.
Thanks!