-40%
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4
Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4

Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire Exit Vehicle Detector - CP-4

$ 92.37

Availability: 54 in stock
  • MPN: CP4-100-5W
  • Power: 8–24 VAC or 8–30 VDC
  • Type: Vehicle Sensor
  • UPC: 4893993199266
  • Connectivity: Wired
  • Condition: New
  • Brand: Cartell
  • Compatible Brand: Cartell
  • Manufacturer Warranty: 1 Year
  • Model: Cartell CP4-100-5W

    Description

    Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire  Exit Vehicle Detector - CP-4
    Cartell CP4 Vehicle Sensor Kit Exit Wand 5 Wire  Exit Vehicle Detector - Works With All Liftmaster, Viking Access, Doorking, Elite, Eagle, Linear Gate Openers
    NOTE: CP-4 IS NOT A SAFETY. YOU MUST ADD EXTERNAL SAFETY WHEN USING CP-4.
    SELF-CONTAINED SYSTEM WITH LOW STANDBY CURRENT - Open gates automatically as guests leave a property with this all-in-one system that works with electric or solar gates. Lowest standby current in the industry by 95%.
    All-in-one unit without external circuit board. Hook wires directly to gate operator.
    • CP-4 may be installed above ground by screwing “puck” directly to an immovable object.
    • If installed above ground, use conduit to mechanically protect cable (animals will eat).
    • Car should be going at least 5 MPH at sensor to be detected. Install CP-4 at least:
    • 6-10 feet away from buried power, telephone, or invisible dog fence
    • 10 feet away from natural gas lines
    • 20 feet away from power pole with a transformer
    • 100 feet back from railroad traffic
    • 200 feet away from high power substation power lines
    • 80-100 feet back from gate operator
    Payments & Returns Policy