2GIG Wireless Water Leak Detector (2GIG-FT6-345)

Description

Don't let water damage ruin your home. Add the 2GIG Wireless Water Leak Detector to rooms that are susceptible to flooding such as the bathroom, laundry room, kitchen, and basement. This single-piece unit is designed to detect wet or dry floor conditions as well as ambient temperature. Once water is detected or a specific temperature threshold is exceeded, it will send a notification to your smartphone via the Alarm.com monitoring service app (subscription required), or send an alarm directly to your security panel. The detector is also capable of detecting clean or dirty fresh water, salt water and tap water.
Detects wet or dry floor conditions as well as ambient temperature
Dual sensing technology detects water from leaks above or pooled water below
Uses metal probes for detection: two on the top and three below
Compatible with 2GIG, Honeywell, and other 345MHz systems
Battery-powered, no wiring required
Remote monitoring via the Alarm.com app (subscription required)
Detect Water Leaks from Above and Below
The 2GIG Wireless Water Leak Detector offers a simple, yet versatile design for easy monitoring of any location. Unlike most leak detectors on the market, it features dual sensing technology, which means it can detect water leaks from above and below. It has two tiny metal probes on the top for detecting dripping water from leaking pipes above. It also has three tiny metal probes on the bottom for detecting pooling water underneath it. Dual sensing technology adds another level of leak detection you can't find in other leak detectors. It really provides the best protection against water leaks because it gives you both drip and flood notifications so you can quickly prevent or minimize costly water damage from occurring.
Possible Applications for Flood:
Water heater
Basements
Laundry rooms
Sump pumps
Kitchen sinks
Bathroom sinks
Bathrooms
Temperature Conditions:
Heat:
If the temperature is more than 95°F (35°C) for three (3) minutes, the detector will send a loop 2 transmission.
If the temperature is less than 95°F (35°C) for three (3) minutes, the detector will send a loop 2 clear.
Cold:
If the temperature is less than 41°F (5°C) for three (3) minutes, the detector will send a loop 1 transmission.
In the temperature is more than 41°F (5°C) three (3) minutes, the detector will send a loop 1 clear.
Contents
Water Leak Detector
User Manual
Notes
Requires connection to a compatible control panel/receiver (2GIG, Honeywell, 345MHz compatible, sold separately).
For remote monitoring using a smartphone, requires the Alarm.com app (subscription required).
Technical Details
Manufacturer Part #:
2GIG-FT6-345
UPC:
817082013312
Color:
White
Wireless Signal Range:
350 ft (106.7m), open air with Wireless Control Panel
Transmitter Frequency:
345 MHz
Compatibility:
2GIG & Honeywell
Supervisory Interval:
70 minutes
Dimensions:
2.4(D) x 1.3(H) inches (61 x 33 mm)
Temperature Thresholds:
High: 95°F (35°C)
Low: 41°F (5°C)
Operating Temperature:
32° to 104° F (0° to 40° C)
Operating Rel. Humidity:
5 to 95%, non-condensing
Battery:
CR123A 3V Lithium battery (included)
Projected Battery Life:
5 years
Certifications:
FCC, IC
Warranty:
2 Years